How do I enable WPS on my ZyXel router?

Step3: Go to Expert Mode > Wireless > WPS, set the wireless band to 5GHz and enable WPS and the PIN code setting. Then press the Generate button to generate the PIN number of the home router. Step4: Write down the PIN number of the home router and press the Apply button to save the WPS configurations.

How can I make my ZyXel router faster?

Placing your ZyXel router at an elevated height may also help boost the wireless signal for your network. Most ZyXel routers include slots on the bottom that enable you to mount them on walls.

How do I enable 5G on my ZyXel router?

Log in using the username admin and the password 1234.

  1. Select the Settings icon (two gears) on the left side of the screen.
  2. Select Wireless Settings LAN 5G.
  3. Select the More AP tab.
  4. Select Edit on the right-hand side of Row 1. (
  5. Check the box at the top to Activate:
  6. Enter a name under Name (SSID).

Does ZyXEL router have WPS button?

2 Press the WPS button on the client. sticker. key to connect.

How do I fix my ZyXEL Wireless router?

Reboot the router by unplugging it from its power source for 10 seconds and then plugging it back in. If it is still not working, factory reset the router by pushing a paper clip or pen into the Reset hole on the back of the router. Please note, this will change the WiFi name and password back to the default.

Is Zyxel a good router?

The Zyxel Armor G5 is a good choice if you’re looking for a Wi-Fi 6 router with a high-speed WAN port and a 10GbE LAN port for connecting to switches, NAS devices, and media servers.

How do I fix Zyxel Wi-Fi?

How do I change from 2.4 GHz to 5GHz zyxel?

Hover your mouse over the the “Network Settings” icon at the bottom of the page, then select “Wireless” from the menu that pops up. This router has 2 seperate wireless bands.. 2.4Ghz and 5GHz. If you device supports 802.11ac, we recommend using the 5GHz band.

Why is my 2.4 GHz not working?

If your device can’t connect to your 2.4 GHz Wi-Fi band, check your device settings and make sure it’s set to connect to the 2.4 GHz band. You can also update your router and your device and restart or reset the router.

What is the default password for the Zyxel router?

The default password for the Zyxel router is 1234 . If the password was previously changed, type in the new password to continue. Once logged in you will be prompted to change the administrative password, only if still using the default 1234 credentials.

How do I log in to Zyxel?

Enter the ZyXEL administrative credentials: username=admin & password=1234 Or, enter the ISP proprietary administrator credentials: must be obtained from the ISP

What is the wireless speed of the Zyxel router?

The Zyxel router is capable of wireless speeds up to 600Mbps on the 2.4GHz wireless spectrum using a 4×4 antenna configuration and 40MHz channel width, however, speeds will vary depending on hardware capabilities, distance from base station, obstacles and obstacle build materials as well as other variables.